(1) The hoist shall comply with the requirements of JC460.1 and this standard, and shall be manufactured, installed and used in accordance with the design drawings and technical documents approved by the prescribed procedures. Technical requirements not specified in the…
1. The hoist shall be maintained and managed by designated personnel, and the key of the power switch box shall be managed by designated personnel. 2. The hoist must have a winch limiter and a travel limiter. The limiter should…
1. The bucket elevator should be started with no load. Therefore, all materials in the bucket should be drained before each shutdown, and then the machine should be stopped. 2. It cannot be reversed. Reversing may cause chain derailment, and…
1. The bucket elevator must be firmly installed on a solid concrete foundation. The surface of the concrete foundation should be flat and horizontal to ensure that the bucket elevator meets the vertical requirements after installation. The middle and upper…
Bucket elevator is a conveying equipment for vertically lifting materials. It has the advantages of simple structure, low maintenance cost, high conveying efficiency, high lifting height, stable operation and wide application range. (1) Low driving power. It adopts inflow feeding,…
(1) Rubber belt: Fixed to the belt mouth with screws and elastic gaskets. The belt is 35-40mm wider than the bucket. Generally, the rubber belt can transport materials with a temperature not exceeding 60°C, and the heat-resistant rubber belt can…
The hopper scoops up the material from the storage below, and it is lifted to the top by the conveyor belt or chain, and then turns downward after passing the top wheel. The bucket elevator pours the material into the…
Chain conveyor is a common assembly line in modern production. In the process of automation, its role is obvious. Chain conveyor has many characteristics, such as large carrying capacity, stable transportation, and 24h continuous operation, which makes it popular with…
1. Whether the chain connection is loose or deformed; 2. Whether there is abnormal noise or vibration when the chain is running, and whether the chain lubrication is kept good; 3. Check whether the chain pin has signs of embroidery,…
1. The total resistance and required power of the conveying equipment are generally determined by the inclination and length of the conveying line; 2. The conveying capacity of the conveyor is generally determined by the size of the components, including…